DIMENSIONS AND WEIGHT
- Height: 54 cm
- Width: 40 cm
- Depth: 22 cm
- Unit weight: 12 kg (without regulator set)
- Complete non-deco version weight: 13.4 kg
- Complete full deco version weight: 14.8 kg
FEATURES
- Two (2) scrubber canisters, each containing 1 kg of CO2 absorbent that can be refilled by user
- Two (2) integrated weight pockets, each containing a maximum of 2.5 kg of weight
- Fully adjustable harness system, from XS to XXL
- Safety gag strap on mouthpiece
- 2 oxygen sensors
- Constant oxygen fraction supplied to the diver, adjustable during diving
- Reverts automatically to full nitrox breathing in case of failure
- Remaining scrubber time calculated by the dive computer
- No tools required for preparation, use, cleaning
LIMITS OF USE
- Maximum recommended depth using one stage cylinder as gas supply, no decompression: 30 m
- Maximum allowed depth using two stage cylinders as gas supply: 40 m
- ppO2 during use: minimum 0.22 bar, maximum 1.60 bar
- Water temperature: minimum 4°C, maximum 34°C
- Allowed nitrox mix: minimum 30%, maximum 99%
- Approved scrubber material: Sofnolime 797
- Scrubber material endurance depending on temperature and metabolic oxygen consumption: calculated by the dive computer (i.e. at 15°C or higher, with medium/high oxygen consumption, duration is > 3 h)
MAXIMUM WORK RATE CONDITIONS
- 75 RMV at 40 m, CO2 production of 3 l/min for 5 min
ELECTRONICS
- Three sets of redundant electronics, each with an individual battery system
- All battery systems can be charged from one single point
- 2.8” full color, high contrast dive computer screen
- User adaptable gradient factor decompression algorithm
- HUD with clear GOOD / FAIL indication
- Approved to 40m
FACTS
DOWNLOADS
-
Horizon Leaflet
Find out more about the Horizon SCR in our dedicated leaflet.
