DIMENSIONS AND WEIGHT

• Height: 54 cm
• Width: 40 cm
• Depth: 22 cm
• Unit weight: 12 kg (without regulator set)
• Complete non-deco version weight: 13.4 kg
• Complete full deco version weight: 14.8 kg

• Two (2) scrubber canisters, each containing 1 kg of CO2 absorbent that can be refilled by user
• Two (2) integrated weight pockets, each containing a maximum of 2.5 kg of weight
• Fully adjustable harness system, from XS to XXL
• Safety gag strap on mouthpiece
• 2 oxygen sensors
• Constant oxygen fraction supplied to the diver, adjustable during diving
• Reverts automatically to full nitrox breathing in case of failure
• Remaining scrubber time calculated by the dive computer
• No tools required for preparation, use, cleaning

• Maximum recommended depth using one stage cylinder as gas supply, no decompression: 30 m
• Maximum allowed depth using two stage cylinders as gas supply: 40 m
• ppO2 during use: minimum 0.22 bar, maximum 1.60 bar
• Water temperature: minimum 4°C, maximum 34°C
• Allowed nitrox mix: minimum 30%, maximum 99%
• Approved scrubber material: Sofnolime 797
• Scrubber material endurance depending on temperature and metabolic oxygen consumption: calculated by the dive computer (i.e. at 15°C or higher, with medium/high oxygen consumption, duration is > 3 h)

• 75 RMV at 40 m, CO2 production of 3 l/min for 5 min

• Three sets of redundant electronics, each with an individual battery system
• All battery systems can be charged from one single point
• 2.8” full color, high contrast dive computer screen
• User adaptable gradient factor decompression algorithm
• HUD with clear GOOD / FAIL indication
• Approved to 40m